Paegelow's Waiex-B Build Log

1 hour Installing the heads was pretty straightforward.  Just don't forget the super tin and pushrod tubes! I started by slightly ex...

3 hours The next task is to set up and install the pistons and cylinders. I started by removing each piston and its rings one at a time ...

4 hours Several assorted things done today! I started by installing the prop drive lugs.  I just used a 5/16" bolt just like what i...

3 hours I finally have all the main bearings so the crank dropped right in! I noticed some slight interference between the crank and ...

0.5 hours The crankshaft showed up, but unfortunately the split main bearing that came with it was damaged.  Sonex is sending a new one so...

3 hours Still waiting for my crankshaft, but there were a few more little tasks I could get done in the meantime. I installed all the va...

2 hours I've read that spark plugs will eventually tear up the threads on the cylinder heads, so putting Time-Serts in the holes is a ...