1 hour
Jumping around a bit, but spending so much time near those rudder pedal mounting brackets made me want to get the pedals installed while I had access to that area. First I had to make these blocks. I had this nice chunk of 3/4" phenolic material, which was just enough.
I cut out four rectangles to make the four halves I'd need, then drilled each 3/16" bolt hole so I could bolt the pairs together and make sure everything stayed lined up.
Then I hit the sides with the belt sander to smooth out the seams, and drilled the 1" holes with a forstner bit. It made just a bit of a mess.........
No comments:
Post a Comment