Next thing was the spark plug wires. The four upper plugs are all powered by the magnetos via their built-in wires. I routed each one through a grommet in the baffle. The two rear ones go through the baffle all the way in the outboard corners, through pre-drilled holes. I drilled my own holes for the forward ones.
The lower plugs are powered by the coils, which I haven't installed yet. I popped the boots over the plugs, but I'm not sure exactly how I'm going to route the wires yet, or where I'll even mount the coils. So I'll finish them later.
No comments:
Post a Comment